Wardray Premise MR Trolleys are available in fixed or adjustable height. The Paediatric Trolley designed for infants and young children is also available in both fixed and adjustable height models. All trolleys incorporate Trendelenberg as standard and the low base design ensures stability and ease of movement on all models.
Full service contract available throughout the UK.
Adjustable Height Patient Trolley
TopThe Series III MR Adjustable Height Trolley has been re-designed and now offers the following key features:
- Fully tested at 7 Tesla.
- Trendelenberg supplied as standard.
- Weight capacity significantly increased to 220kg (490lbs).
- Hydraulic dual pedal pump for ease of elevation and patient comfort.
- Folding cot sides.
- Flame retardant, high density mattress in a wipe clean material to prevent the spread of infection.
- Adjustable backrest.
- Trolley fitted with corner buffering for protection.
- Fitted with non marking, low rolling castors and foot operated brakes.
- IV pole with four fixing points as standard.
- Finished in hardwearing epoxy powder coating.
- Optional Oxygen Cylinder holder.
| Dimensions | |
|---|---|
| Maximum Height | 940mm |
| Minimum Height | 495mm (to table top) |
| Mattress Thickness | 50mm |
| Overall Size of Top Section | |
| Length | 2175mm |
| Width | 640mm |
| Overall Size of Base | |
| Length | 1475mm |
| Width | 610mm |
| Ref: MR5501 | Adjustable Height Patient Trolley |
Successfully tested at 7 Tesla.
Paediatric version also available.
Fixed Height Patient Trolley
TopManufactured with the same basic features as the as the Adjustable Height Trolley, the Fixed Height Trolley features the following characteristics:
- Manufactured to table height to suit individual customer requirements.
- Fully tested at 7 Tesla.
- Trendelenberg supplied as standard.
- Weight capacity significantly increased to 220kg (490lbs).
- Folding cot sides.
- Flame retardant, high density mattress in a wipe clean material to prevent the spread of infection.
- Adjustable backrest.
- Trolley fitted with corner buffering for protection.
- Fitted with non marking, low rolling castors and foot operated brakes.
- IV pole with four fixing points as standard.
- Finished in hardwearing epoxy powder coating.
- Optional Oxygen Cylinder holder.
| Dimensions | |
|---|---|
| Maximum Height | 1100mm |
| Minimum Height | 630mm (to table top) |
| Mattress Thickness | 50mm |
| Overall Size of Top Section | |
| Length | 2175mm |
| Width | 640mm |
| Overall Size of Base | |
| Length | 1475mm |
| Width | 610mm |
Please Note: Height dimensions are a guide. Please contact our sales office. if you require either a lower or higher table top.
| Ref: MR1501 | Fixed Height Patient Trolley |
Sucessfully tested at 7 Tesla.
Paediatric version also available.
Paediatric Trolley
TopThis Trolley is specifically designed for the safe transportation of infants and young children to the MR suite.
The Paediatric Trolley has the same design features as our popular adult trolleys and is available as either fixed or adjustable height.
The cot sides drop down and are fitted with protective buffers for patient safety.
| Dimensions | |
|---|---|
| Maximum Height | 1100mm |
| Minimum Height | 630mm (to table top) |
| Overall Size of Top Section | |
| Length | 1710mm |
| Width | 680mm |
| Overall Size of Base | |
| Length | 1475mm |
| Width | 610mm |
| Cot Side | |
| Length | 1150mm |
| Height | 225mm (above trolley top) |
| Mattress Thickness | 50mm |
| Fixed Height | |
| Maximum Height | 1100mm |
| Minimum Height | 630mm (to table top) |
| Adjustable Height | |
| Maximum Height | 940mm |
| Minimum Height | 540mm |
Maximum and minimum heights given for the Fixed Height Paediatric Trolley are a guide. Dimensions outside of this range can be accommodated.
| Ref: MR1501/P | Fixed Height Paediatric Trolley |
| Ref: MR5501/P | Adjustable Height Paediatric Trolley |
To guarantee warranty and MR safety only trained personnel should undertake any maintenance on these products.