Back
MR Compatible Room Oxygen Monitor

OxiQuant MRI Oxygen Monitor

Top

MR105A

OxiQuant MRI Oxygen Monitor
Click image to enlarge

Specifically designed to provide continuous sampling of the oxygen content in an MRI Room, the OxiQuant MRI Oxygen Monitor gives fast and accurate warning of any lowering of the oxygen level.

OxiQuant MRI comes with the following key features:

Continuous sampling of the oxygen content from single or multiple locations within the room are achieved by drawing a steady flow of air across the oxygen fuel cell detector at a predetermined velocity.

The normal oxygen concentration should be 21%. Any variation will be rapidly detected.

The monitor is installed in the Control Room. A rear connected plastic tube is passed through a simple RF waveguide into the examination room. If this is not already provided with the RF cage, the waveguide included in our system is designed to be compatible with all types of cage construction and can be retrofitted with minimal disruption to the operation of the department.

A pair of contacts are fitted within the Monitor to enable the MRI room ventilation system to be activated when the oxygen monitor alarm sounds. The contacts are easily accessed via a four pin socket at the rear of the unit.

Technical Specification

Top
Dimensions
Height 120mm
Width 410mm
Depth 300mm
Weight 4.5kg

Power: 220/240 volt 50Hz; 120 watts controlled by a mains on/off switch.

Display Panel: features the following touch controls:


All Wardray Premise MR Products are guaranteed 100% MR compatible.

To guarantee warranty and MR Compatibility only trained personnel should undertake any maintenance on these products.

Please note that the terms "MR Compatible" and "MRI Compatible" are interchangeable.