To meet a requirement for cassette storage and a working surface behind screens, two standard units are offered with the post-formed top cut to size.
Units are constructed from boards faced and edged in white plastic laminate (not melamine). Optional tops are available in white or grey, with a post-formed front edge. The minimum worktop depth is 420mm.
A void for cable entry can be created behind either unit and side infill panels extending the depth by 180mm are then provided.
We recommend that all worktops are finally cut to size on site after the screen has been installed and cable routes confirmed. Alternative cassette racks to meet specific needs can be produced to order but we would stress that the use of standard items will always be more cost effective.
Storage Compartments
Top
The diagram on the right illustrates the storage compartments for the two different standard cassette rack configurations.
- For 18cm x 24cm cassettes
- For 24cm x 30cm cassettes
- For 18cm x 43cm cassettes
- For 30cm x 40cm, 35cm x 35cm & 35cm x 43cm cassettes
Standard units are 410mm deep overall, 400mm inside but may be reduced as necessary for smaller cassettes. Infill panels are provided for the sides, if necessary, to increase depth to 590mm. Standard post-formed worktops are 600mm deep and supplied to order.